Batterien

840 stk Solar module SOLE 260W -840 stuck 219KW

Abmessung 1640x992x40mm x 840 stuck

Glas-Glas-Solarmodule sind langlebig und extrem robust gegenüber jeglichen Witterungseinflüssen. Dabei sind sie weiterhin leicht wie herkömmliche Glas-Folie-Solarmodule und lassen sich ebenso unkompliziert montieren.

Die neue Generation Glas-Glas-Solarmodule zeichnet sich durch folgende Produktvorteile aus:

Super-Leichtgewicht durch 2mm dünnes Glas
Höchste Ertragszuverlässigkeit
Höchste mechanische Belastbarkeit
100% Schutz gegen PID
Höchste Brandsicherheit
30 Jahre Produktgarantie
30 Jahre lineare Leistungsgarantie

Sole
Sunmodule SL 260 Poly / model 2015
260W Polycrystalline Solar Panel

The Sole SL 260 solar panels herald an innovative new module concept. The Plus-sort (based on a Sole flash report) and five watt model stepping ensures true, highest system efficiency and dispenses with the time-consuming task of sorting the modules on site. The fully automated production process at the Sole factories creates a module quality that is consistently high, which in turn will ensure high yields for the long term.

High-quality, high performance, and high reliability – the Sole module is designed and built for long-term yield stability and ease of use. Every module is factory flashed at standard test conditions (STC) to determine the power output and then sorted in 5 watt increments. Only modules with a flashed power that is greater than or equal to the nameplate rated power are delivered. Flash report data is provided with every order.

The patented box channel frame design provides extraordinary stiffness in bending and torsion. The laminate with 4mm glass is set deep in the frame channel and secured with precision applied adhesive. The frame is assembled by press fit to maximize strength and longevity. The result is an extremely robust package that can be mounted in any orientation and can withstand static loads of up to 113 psf.

Sole provides a 10-year Limited Product Warranty and 25-year Linear Service Warranty*.
*See warranty statement in the 'Documents' section above for details.

ELECTRICAL DATA AT STC

Maximum Power (Pmax)

220 Wp

230 Wp

235 Wp

240 Wp

245 Wp

250 Wp

255 Wp

260 Wp

Voltage at Maximum Power (Vmpp)

29.1 V

29.8 V

30 V

30.4 V

30.6 V

30.7 V

30.9 V

Current at Maximum Power (Impp)

7.56 A

7.9 A

7.88 A

8 A

8.05 A

8.17 A

8.3 A

8.42 A

Open Circuit Voltage (Voc)

36.2 V

35.6 V

35.7 V

36.1 V

36.3 V

36.4 V

36.7 V

Short Circuit Current (Isc)

8.32 A

8.6 A

8.43 A

8.57 A

8.63 A

8.71 A

8.8 A

8.89 A

Panel Efficiency

13.55 %

14.17 %

14.47 %

14.78 %

15.09 %

15.4 %

15.71 %

16.01 %

Standard Test Conditions (STC): air mass AM 1.5, irradiance 1000W/m², cell temperature 25°C

ELECTRICAL DATA AT NOCT

Temperature

45±2 °C

Nominal Operating Cell Temperature (NOCT): 800W/m², AM 1.5, windspeed 1m/s,ambient temperature 20°C

THERMAL RATINGS

Operating Temperature Range

-40~85 °C

Temperature Coefficient of Pmax

-0.44 %/°C

Temperature Coefficient of Voc

-0.34 %/°C

Temperature Coefficient of Isc

0.06 %/°C

MAXIMUM RATINGS

Maximum System Voltage

1000 V

Series Fuse Rating

15 A

MATERIAL DATA

Panel Dimension (H/W/D)

1640x990x40 mm

Weight

21 kg

Cell Type

Polycrystalline

Cell Size 156x156 mm

Cell Number 60

Glass Type Tempered, Low Iron

Glass Thickness 3.2 mm

Due to continuous research and product improvement the specifications in this Product Information Sheet are subject to change without notice. Specifications can vary slightly. For installation and operation instructions, see the applicable manuals. No rights can be derived from this Product Information Sheet and Sole GmbH assumes no liability whatsoever connected to or resulting from the use of any information contained herein.