Battery

Inverter charger SOLE PROFI 4500W-24V

*LCD digital display show voltage, load and battery info in real time.
*Peak power is three times of rated power.
*Can work with inductive load such as air conditioner, motor door and so on.
*Pure sine wave output, available for sensitive load.
*4-step progressive charging, 7 battery type selector.
*Fast and powerful charger with 35A and 70A.
*Accept generator’s energy output.
*High power factor 0.9, low power consumption.
*Automatically transfer between battery and line modes.
*Microprocessor control guarantees high reliability.
*Bypass without battery connected.
*Remote control function.
*Protection against: Over load, over temperature, over charging, low battery
*Reverse connection (optional by hard connector), Blackouts

Specification:

MODEL	SL-1500		SL-2200	SL-3000		SL-4500		SL-6000		SL-7000	SL-9000
Peak Power	3000W		4000W	6000W		9000W		12000W		14000W	18000W
AC Input
Phase & waveform		Single phase & Pure Sine Wave
Voltage		110/120/130VAC or 220/230/240VAC
Acceptable Voltage		95-126VAC or 194-253VAC±4%
Low Line Disconnect		85VAC±4% or 184VAC±4%
Low Line Re-connect		95VAC±4% or 194VAC±4%
High Line Disconnect		136VAC±4% or 263VAC±4%
High Line Re-connect		126VAC±4% or 253VAC±4%
Frequency		50Hz:41-54Hz 60Hz:51-64Hz
AC Output
Phase & waveform		Single phase & Pure Sine Wave (bypass mode sync to input)
Voltage		110/120/130VAC or 220/230/240VAC±10%rms (bypass mode sync to input)
Frequency		50Hz±0.3Hz 60Hz±0.3Hz (bypass mode sync to input)
Peak Power		3 times of rating power
Short Circuit Protection		Yes, shutdown after 10ms
Power Factor		0.9-1.0
DC Input
Battery Voltage		12VDC or 24VDC or 48VDC
Minimum Start Voltage		10VDC or 20VDC or 40VDC
Low Battery Alarm		10.5±0.3vdc or 21±0.6vdc or 42±1.2vdc
Low DC input Shut-down		10±0.3vdc or 20±0.6vdc or 40±1.2vdc
High DC input Alarm & Fault		16±0.3vdc or 32±0.6vdc or 64±1.2vdc
High DC input Recovery		15.5±0.3vdc or 31±0.6vdc or 62±1.2vdc
MAX Charger Current		20A/35A/ 50A/75A/90A(According to the Inverter model)
System parameter
Battery Mode Efficiency		>85%
Line Mode Efficiency		>96%
power saver		Load <=25W (Enabled on “P/S auto” setting of Remote control)
Audible Alarm		Sounding when the heat sink’s tem is over 100℃ and shutdown after 30 seconds.
Over Load Protection		110%<load<150%, font="" 60s.<="" after="" fault="" and="" 1s,="" every="" 0.5s="" beeps=""> Load>150%, beeps 0.5s every 1s, and Fault after 20s.
Protections		low battery、over charging、over temp、over load
Communications		RS-232/USB/SNMP(custom-made)
Operating Environment		0-40℃,0-90%RH(non-condensing)
Audible Noise		<60dB
Net Weight(KG)		16kg	18kg	20kg	25kg		39kg		42kg		49kg
Dimension L X W X H		470 X223 X185mm					650 X223 X185mm